Nikwax Tech Wash + TX Direct Wash-In

Tech Wash

To clothing

Machine Wash

1. Remove all detergent build-up from the detergent dispenser.
2. Place maximum of 2 garments in washing machine
3. Use 150ml in medium/hard water areas and 100ml in soft water areas for 1-2 items.
4. Run 30°C synthetic cycle and slow spin (front loader) or 40°C synthetic cycle (top loader)
5. Alternatively, just apply Nikwax in a simple hand wash
6. Drip-dry or tumble dry on a low setting if the care label allows

To tents and accessories

1. Apply item in hand-hot water in a sink or bowl and agitate
2. Rinse thoroughly in clean water.
3. Drip-dry

Note:

Volume guide (take from label) To clean 1-2 items use 2 full caps (100 ml) in soft water or 3 full caps in hard water. Quantities used will depend on condition and size of items.

TX Direct

For best results remove all non-washable parts and always clean item(s) first with Nikwax Tech Wash® in a separate wash cycle. No need to dry item(s) before waterproofing.  Shake well before use.

Machine Wash

1. Remove all detergent build-up from the detergent dispenser.
2. Place maximum of 2 clean garments in washing machine.
3. Use 100ml per garment (front loader) or 150ml per garment (top loader).
4. Run 30°C synthetic cycle and slow spin (front loader) or 40°C synthetic cycle (top loader)

Hand Wash (use gloves)

1. Immerse 1 clean item in 6 L of hand-hot water in a sink or bowl
2. Add 50ml of TX.Direct
3. Agitate to mix, leave to soak for 5-10 minutes, then agitate thoroughly
4. Rinse in cold water until water runs clear

Do not machine-wash garments if taped seams have become dislodged.*

To maintain waterproofing always wash with Nikwax Tech Wash®. Do not use detergents.

*Faulty taped seams sometimes become detached on old or worn garments. They can be re-stuck using a proprietary clear glue after waterproofing and drying.